Relic-that-Guitar-Fender Custom Shop Style-Part 1
Pete gets a suspicious phone call. www.swrnc.com or 972-420-1293
Pete gets a suspicious phone call. www.swrnc.com or 972-420-1293
me playing "this charming man" by the smiths // fender 57 american vintage stratocaster plugged into a fender hot rod deluxe ... more about me on: www.myspace.com/alexonstage
Duration : 0:2:39
Using my home-made "FrankenTele" and a Jam Track to demo my Fender Vintage Noiseless Telecaster pickups.
Duration : 0:3:41
Here is tyler doing a nice short demo of a nice vintage Rhodes Piano that we have available for auction right now, it has a very cool panning effect on the cabinet for ultimate tones you have never heard of! It as available for auction so act now!
Duration : 0:1:2
"Its going to be Something" by Quoc Pham. 52 fender vintage hot rod telecaster(lead), Modded Gretsch g5222(Weber Alnico 6, 60s Ge 12ax7 and 50s Rca Metal 6v6). 72 Franciscan(rhythm) Lexicon Omega and Audix Om2 mic.
Duration : 0:4:24
Josh from http://www.Cheap-Guitars-Report.com reviews a used Fender Squier 51.
This quintessential cheap guitar has lots of vintage vibe and tons of modification potential.
Hear the different tones possible with this bargain axe.
Email me through the "Send Message" link on my channel http://www.youtube.com/user/cheapguitars if you have any questions or requests.
Hit the big yellow SUBSCRIBE button above to get updates whenever another lesson gets launched on YouTube.
Check out my cheap guitars info and reviews at http://www.cheap-guitars-report.com
Duration : 0:7:41
A demo of a fully hot rodded GA5 valve head, not modified by me but by a nice guy on ebay
http://search.ebay.co.uk/_W0QQsassZandydokken
(link posted with permission)
Mods include:
'Power Scaling' - Lets you crank up the amp but alows the volume to stay
low - keeps the neighbours happy.
Hammond '125DSE' Output Transformer fitted.
Bias Switch:
Position '1' is 'Sharp and Bright' - This Setting makes use of
'Negative Feedback' Direct from a Coil Tap on the Hammond '125DSE' OPT -
Delays Distortion and Increases Headroom.
Position '2' is 'Clean and Mellow' - The Preamp Valve is Biased to
match the 'Champ' Amp Sound.
Position '3' is the 'High Gain' Sound -The Preamp Valve is Biased to
match Modern Valve Amps - The Harder you drive it the Better it Gets.
Gain Switch:
Center position = Clean
Up = Medium Gain
Down = High Gain
The Drive Control. This sets How Hard the Preamp Valve is Driven.
Tone = Does what it says on the tin.
Master Volume Control = Sets how hard the power amp valve is driven.
Standby, Triode and Pentode Switch. The Standby Switch lets
the Valves warm up before powering up the actual amp.
Triode or Pentode = The Output Valve in this Amp is Classified as
a Pentode. This is its Normal Mode of Operation, Producing about 5 Watts of
Audio Output Power. However - The Valve can be Forced to operate as a
'Triode' Producing 1.8 Watts of Output Power. Not only does it more than
Half the Output Power, but it Totally Changes the Sound Characteristics of
the Valve making it Warmer, Smoother and More Compressed.
'Rear Panel'
Three Speaker Outputs - 4, 8 and 16 Ohms.
Line Out Socket - For connection to a 'DI' Box or Recorder. The 'Line
Out' is an Attenuated Speaker Signal.
Input Impedance Corrected
Both Valves Re-Biased and Calibrated to work within their Prescribed
Design Parameters - More than 50% of the Components on the PCB have to be
changed in order to Accomplish this.
Enclosed Fuse Mounted on the PCB - Protects the Mains Transformer in
the Event of a Fault.
Much Larger/More Smoothing Capacitors on the HT and Heater Rails -
'Enhances' Bass Response and Eliminates 'Hum'.
Plus other modifications
Duration : 0:10:9